Start a Conversation

Solved!

Go to Solution

1 Rookie

 • 

5 Posts

19

April 30th, 2024 01:32

Upgrade server second processor r730

Hi

I want to upgrade my server PowerEdge R730 second processor 

What equipment needed? 

Please advise 

3 Apprentice

 • 

406 Posts

May 6th, 2024 11:54

@alipz95​ yes buddy with the Intel architecture. Memory must be equally split between all processors so for example if you install 64GB of memory on each processor bus. The OS still sees all 128GB of memory but the memory is spread across the two CPUs.

It is also important that the memory on CPU1 physically matches the memory on CPU2. 

3 Apprentice

 • 

898 Posts

May 2nd, 2024 15:05

It sounds like you want to add a 2nd CPU to your R730, if yes, just get the same exact processor as CPU 1, and you would need to order a CPU heatsink from our parts department as well. if you google R730 cpu upgrade kit, you should see lots of information on what you would specifically need. In case you upgrade your existing CPU as well, be SURE to upgrade your bios and idrac before installing the newer version processors. 

Rey
#1work4Dell

3 Apprentice

 • 

406 Posts

May 4th, 2024 15:36

you need the same CPU heat sink and DIMMS for CPU 2.

DIMMs must be of same configuration.

1 Rookie

 • 

5 Posts

May 6th, 2024 03:20

@DELL-Rey G​ 

Hi

Could you share how to upgrade bios and idrac before installing new processors ?

1 Rookie

 • 

5 Posts

May 6th, 2024 03:20

@Praveen.Singh​ 

Hi

must upgrade the stick DIMMS too ?

No Events found!

Top